Black Friday is a good time to compare oxygen concentrators, but I would not start with the discount. First, confirm the required delivery mode and setting. Then decide whether you need a home or portable unit. Only after that should you compare concentration, flow or pulse settings, battery life, weight, and package contents.
Important: This guide explains equipment features and purchasing considerations. It does not determine your oxygen needs or settings. Confirm the required delivery mode, settings, and intended use with a qualified healthcare professional before purchasing or changing equipment.

Before comparing individual models, I would confirm four things:
Remember that home versus portable describes the equipment's form, while Pulse Flow versus Continuous Flow describes its oxygen delivery method. These are two separate classifications.
For example, VARON's VP-6 is a portable Continuous Flow model. The VP-8G, VP-8 Lite, and VP-2 are Pulse Flow models.

The main difference is how oxygen is delivered. Pulse Flow releases oxygen in individual doses, while Continuous Flow provides a steady stream at a selected rate. Their settings use different measurement systems and cannot be compared by number alone.
In a breath-triggered system, the machine detects the beginning of inhalation and releases a measured oxygen dose near the start of the breath. This dose is called a bolus. The device then waits for the next detected breath.
Some models also offer timed or fixed-frequency pulse modes. Instead of waiting for each inhalation, the device releases separate pulses at set intervals. This is still Pulse Flow, not Continuous Flow. The exact trigger and backup behavior depend on the model.
VARON offers different Pulse Flow configurations:
When comparing these models, check the bolus volume, which refers to the amount of oxygen delivered in one pulse. Also consider breath detection, available pulse modes, and battery runtime. A higher number of settings does not automatically mean better suitability.
The published product information does not provide a complete mL-per-setting chart for these models. Do not estimate the actual oxygen dose from the setting number. Check the product manual or request model-specific information.
Continuous Flow supplies oxygen-enriched gas at a steady rate during inhalation and exhalation. Its output is measured in liters per minute (L/min).
For example, 2 L/min means two liters of output gas per minute at that setting. It does not mean two liters of pure oxygen. The actual oxygen content also depends on the concentration specification.
When comparing Continuous Flow models, check the available flow range and the oxygen concentration at the setting you need.
| Comparison | Pulse Flow | Continuous Flow |
|---|---|---|
| Output | Separate oxygen doses | Continuous gas stream |
| Timing | Breath-triggered or timed pulses | Continuous output |
| Setting format | Device-specific pulse settings | Liters per minute (L/min) |
| Key specifications | Bolus volume, trigger method, pulse settings | Flow range and oxygen concentration |
| VARON examples | VP-8G, VP-8 Lite, VP-2 | VP-6, Serene, VH |
8 Pulse Flow settings do not equal 8 L/min of Continuous Flow. Pulse settings represent device-specific oxygen delivery levels, while L/min measures continuous output. Increasing a pulse setting does not turn a Pulse Flow device into a Continuous Flow machine.
Choosing the wrong delivery mode can leave you with equipment that does not match your required oxygen configuration. A lightweight Pulse Flow model cannot replace a Continuous Flow model when Continuous Flow is required. Similarly, a higher Continuous Flow rating does not automatically make a machine suitable for every oxygen requirement.
Sleep and activity conditions also matter. Some Pulse Flow devices depend on detecting inhalation, so you should never assume that every model is suitable for sleep or every breathing pattern.

Now that you understand the basic differences, you can narrow down the equipment that matches your requirements. I would make this decision in two stages: first confirm the delivery mode, then choose the equipment type.
If your healthcare professional has specified Pulse Flow, compare Pulse Flow models. If Continuous Flow is required, focus on machines that provide the prescribed L/min range.
Do not choose between the two based on price, weight, or the number displayed on the control panel.
| Your Requirements | VARON Models to Compare | What to Focus On |
|---|---|---|
| Portable equipment with Pulse Flow | VP-8G, VP-8 Lite, VP-2 | Pulse settings, bolus information, breath detection, battery runtime, and carrying weight. |
| Portable equipment with Continuous Flow | VP-6 | Available L/min settings, oxygen concentration, weight, and power options. |
| Stationary home equipment with Continuous Flow | Serene Series, VH Series | Flow range, oxygen concentration, noise, dimensions, and maintenance. |
This gives you a practical starting point instead of comparing every product in the catalog. The table identifies models worth researching based on their published delivery configurations; it does not determine which model is medically suitable for you.
Once you have identified the relevant product category, focus on the differences that affect everyday use.
If you need equipment for both home and outdoor use, do not assume that one portable machine automatically covers every requirement. Confirm whether the specific model supports the prescribed settings and all intended operating conditions.
My recommendation: Narrow down the delivery mode first, select the appropriate equipment category second, and compare individual models last. This makes the product comparison much more useful and prevents you from spending time on machines that do not match your requirements.
After selecting the relevant product category, use these specifications to compare your shortlisted models:
Once you have found a suitable model, compare the actual package contents. Check whether the bundle includes additional batteries, charging docks, AC adapters, vehicle power accessories, carrying bags, and replacement filters.
Also review warranty coverage, shipping charges, discount-code conditions, and the final checkout price. A larger bundle is not automatically a better deal if it includes accessories you do not need.
No. Pulse settings and Continuous Flow measurements use different systems. Setting 5 on a Pulse Flow machine is not equivalent to 5 L/min.
No. Portable machines can use either delivery method. The VARON VP-6 is a portable Continuous Flow example, while the VP-8G, VP-8 Lite, and VP-2 use Pulse Flow.
No general assumption should be made. Breath detection, timed-pulse features, and operating requirements vary by model. Confirm the exact model's suitability with a qualified healthcare professional.

Now that you understand how oxygen delivery modes work and how to identify the right equipment category, the next step is to compare specific machines based on your needs.
Part 2: How to Choose a Home Oxygen Concentrator
Explore the VARON Serene and VH ranges, compare their flow capacities, oxygen concentration, noise levels, and home-use features, and identify which configurations deserve a closer look.
Part 3: How to Choose a Portable Oxygen Concentrator
Compare the VP-2, VP-6, VP-8G, and VP-8 Lite based on delivery modes, battery configurations, weight, charging options, and carrying convenience.
The goal is not to find the machine with the biggest number or the largest Black Friday discount. It is to identify the equipment configuration that matches your confirmed requirements, then choose the model and package that best fits your intended use.
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}
Leave a comment